1. Home
  2. Palapa & Tiki Hut Structures
  3. 12ft. x 12ft. Corrugated Gable Roof Hut - 4 Posts
12x12 Corrugated Gable Roof Hut
12x12 Corrugated Gable Roof Hut

12ft. x 12ft. Corrugated Gable Roof Hut - 4 Posts

0 Review(s) Write a Review
Your Price: $2,600.00
Retail Price:$3,600.00
You Save:$1,000.00(28%)
Part Number: PALCH12x12

Choose Options


Our Corrugated Gable Roof Tiki Huts are wonderful over spas, BBQ islands, pools, or just about anywhere else. If you want to truly vacation at home, purchase a Love Shack! There's nothing better than to relax in the shade of a rustic shade hut. Now you really can vacation at home!

Each Standard Hut Kit Includes:

  • Corrugated Galvanized Metal Roofing
  • 4 main poles 6" diameter with supporting lumber
  • Step-by-step instructions
  • Hardware

Our 6 inch diameter poles extend to 2 inch diameter round pine rafters. No cutting of metal roofing is required unless customization is desired.

The leg spacing is from the center of the leg to the center of an adjacent leg.

12x12 Corrugated Hut Top View

12'x12' Square Gable Roof Hut: 10' x 10' (on center)

Pole spacing has been designed to maximize your space in the shade. The poles have been set to the outer edge of the roof frame. If you would like to have the pole this can be done but in most cases will change the overall roof size as well.

Our Corrugated Gable Roof Hut sizes are measured along the ridge then up and down the sides of the sloped sides (not straight across).

General Tools and materials needed for installations:

Usually at least 2 people
Drill with screwdriver bits
Free standing ladder
Wheelbarrow and shovel (depending on main pole installation method)
Cement (depending on main pole installation method)
* Sockets and wrench

Installation Difficulty:


3 out of 5 - This means that this type of hut is somewhat difficult to setup (compared to the simplest.)

*Note: Installation difficulty increases proportionally with the size of hut.

Basic Installation Instructions

  1. Assemble bottom portion of hut. (legs to headers)
  2. Assemble top portion of huts in place on top of posts.
  3. Secure top portion to bottom portion
  4. Attach corrugated roof panels & ridge.
    *Much more detailed instructions come with kit