7 Foot Mex. Palm Palapa Examples

7 Foot Mexican Palm Palapa Kit- Round- 1 Pole

0 Review(s) Write a Review

Your Price: $650.00

Retail Price:$700.00

You Save:$50.00(7%)

Part Number: PALM7

Center Pole Length *

Purlin Roof Framing *

Wood Treatment *

Thatch Roofing *

Fire Retardant Treated Thatch *

Decorative Rope Kit *

Thatch Save® Netting *

Table

Palapa Stand/Base *

Quantity

Description

7 Foot - 1 Pole Mexican Palm Palapa

Palapa umbrellas are also known as thatch umbrellas, tropical umbrellas, thatch palapa, grass palapa, tiki umbrella, or palapa structure. Sitting under a palm palapa will instantly make you feel as if you're on a beautiful tropical beach. There's nothing better than to relax in the shade of a palapa. Now you really can vacation at home!

Each Kit with Standards Options Includes

2 pieces or layers of pre-woven thatch (See the difference between 1, 2 and 3 layers Click Here)
6'' diameter pole
Pre-assembled rafter
1/4" thick x 2-1/2" wide, flat Purlins/Rib Roof Framing
Special composite fascia trim
All necessary hardware
Step-by-step instructions

The Mexican Palm Thatch lasts outdoors approximately 2-8 years depending on the climate. If there is a lot of humidity, wind or rain, your thatch will last closer to the lower end of the spectrum. When the palm thatch needs to be replaced, and if caught soon enough it may be possible to only replace the top layer of thatch (2 layers is the standard option.) You can purchase replacements under Thatch Roof Materials & Extras - Mexican Palm Thatch.

Our 6 inch diameter poles extend to 2 inch diameter pine rafters. The thatch is hand woven Mexican rain-cape thatch and comes in 2 easy to install pieces up to 14 ft. diameter structures. (*2 unless standard option is changed)

Palapa sizes are a rough estimate because of the following. Your 7 foot palapa will have a 6 foot diameter frame and we estimate the thatch to overhang the frame by 6 inches on all sides. If you were to measure from one side of the palapa to the other including the thatch you should measure approximately 7 feet. We estimate all of the round Mexican Palm Palapas to have a 1 foot overhang. All our round Mexican Palm Palapas will have a frame 1 foot smaller then the advertised overall size of the palapa.

General Tools and materials needed for installations:

Usually at least 2 people
Drill with screwdriver bit (impact work great)
Sockets & Wrench
Free standing ladder(s)
Level(s)
Wheelbarrow and shovel (depending on post installation method)

Cement (depending on post installation method)

Installation Difficulty:

2 out of 5 - This means that this type of palapa is moderately difficult to set up.
*Note: Installation difficulty increases proportionally with the size of palapa.

Basic Installation Instructions

Dig a hole in ground 18''-24 in diameter or core a hole into your bar surface 6-10 inches in diameter (depending on palapa size) and place main pole in hole
Connect pre-assembled rafters to main pole
Attach composite fascia trim to ends of rafters (makes structure circular)
Place wood purlins/ribs over rafters (these keep the thatch up between rafters)
Attach thatching to roof frame
**Much More detailed instructions come with kit***

12 Foot Synthetic African Reed Palapa Kit - Round

$3,300.00

(0)

Select Options

Example: 10.5 ft African Reed Tiki Hut/ Palapa, Options: Canyon Brown stain, Palapa stand, Rope Kit.

7 Foot Round/Diameter African Reed Tiki Hut/Palapa - 4 Posts - Standard Options

$1,600.00

(0)

Select Options

9ft. x 18ft. Oval Mexican Palm Palapa - 2 Posts

$2,200.00

(0)

Select Options

14 Foot Round Mexican Palm Tiki Hut/Palapa

14 Foot Round/Diameter Mexican Palm Tiki Hut/Palapa - 4 Posts

$2,550.00

(0)

Select Options

9ft. x 18ft. Oval Palmex Synthetic Palm Palapa - 2 Post

$3,900.00

(0)

Select Options

12x24 Oval Palmex Synthetic Palm Tiki Hut

9ft. x 18ft. Oval Palmex Synthetic Palm Tiki Hut/Palapa - 4 Posts

$4,300.00

(0)

Select Options

7 Foot Mexican Palm Palapa Kit- Round- 1 Pole

Choose Options

Related Items