This natural bamboo rolled fence measures 7.5ft (90 inch) Tall x 8 feet (96 in.) Wide and approximately 3/4-1 inch in diameter. The poles in our fences are high quality Tonkin bamboo that will enhance your backyard instantly.
Our bamboo fencing is 100% eco-friendly and does not contain any pesticides, formaldehydes, or toxic glues. Each fence is held together by a sturdy galvanized steel wire that can be shaped to fit around any structure.
How to cut bamboo rolled fencing height:
Use a circular saw with a new finish blade.
Cut only from the bottom side. (The top side has the ends all cut at the "nodes".)
To ensure bamboo pieces are cut at the same length:
Unroll flat on the ground with 1 or 2, 2x4 underneath & 1 close to where you want to cut.
Make sure the top is pushed against an even wall or piece of wood.
Mark with a Sharpy the desired height on the end bamboo pieces (each end piece.) Connect the marks with a line using a long straight object such as another 2x4.
When cutting, go slow! If you rush and don't use a sharp fine blade the ends will splinter.
How to make small cutouts in bamboo rolled fencing:
Use a new fine oscillating saw blade.
How to shorten rolled bamboo fencing width:
Push all bamboo pieces tightly to the side you want to keep. If you need both sides of the cut, then just keep pieces evenly spaced before cutting.
Cut the metal wire between the bamboo with pliers BUT cut the wire 1-2 pieces farther than needed so you have enough wire to bend back and secure the last piece.
Bend the wire back to secure bamboo from falling out.
